Dear J2 Metals Shareholders,

J2 is heading into 2027 with drill-ready plans taking shape at both of its active projects. Management believes J2’s current market capitalization of approximately C$4.2 million (as of November 16, 2026) does not reflect the value of its project portfolio, particularly relative to peer companies.

At Sierra Plata, our silver-gold-antimony project in Mexico, extensive field mapping, which has resulted in the exciting rediscovery of several historical silver-gold mines and mine workings, is complete.  Before our mapping and surveying program, five historical mines were already known, including the San Miguel multi-level mine which is shared with Grupo Mexico.  We are now up to 41 mines and mine workings (and counting).  “Mine workings” includes tunnels, trenches, past-producing mines, and prospect pits.

It is important to remember that Sierra Plata was a productive silver-gold area during the Spanish Empire era and subsequently, but went dormant roughly 100 years ago after a collapse in the silver price.  Much of the area was taken over by small farmers.

Sierra Plata’s drill permit application has been filed, with geophysics being finalized to further guide hole placement.

At Miniac, our 100%-owned copper-gold-polymetallic project in Québec, the induced polarization (IP) interpretation is complete and a winter 2027 drill program has been designed with final drill pads ready to be sent for consultation and permit approval.

Napoleon, our lode hunt gold project with strong historical drilling by Teck and Kennecott, located in the Tintina belt in eastern Alaska, remains paused as we focus on Sierra Plata and Miniac and while we pursue an appropriate option partner or divestiture to provide the project with the focus it deserves.

Project Location Status Next step
Sierra Plata Guerrero, Mexico Mapping complete; drill permit application filed Drone mag finalization, 3D inversion, trench assays, then 2027 drilling
Miniac Abitibi, Québec IP inversion and interpretation received; drill program designed Finalization of drill permits & Winter 2027 drilling
Napoleon Fortymile district, Alaska Paused Option partner and divestiture discussions ongoing

Sierra Plata Project, Mexico

Sierra Plata is a silver-gold-antimony project in the Zacualpan-Taxco district, which J2 holds under option to acquire a 100% interest. The drill permit application has been filed, property mapping is complete, and the geophysics needed to finalize drill targets is being completed for a maiden drill program in 2027.

Mapping, sampling and trenching. Since our August 25 update, which reported mapping of about half the property, the team led by Country Manager Carlos Cham has completed geological, structural and alteration mapping of the entire project area. The field program has now:

  • identified nine veins, up from seven, including San Miguel, El Salto, El Sabino and El Resumidero;
  • located 41 historic mine workings (which includes tunnels, trenches, past-producing mines and prospect pits), up from 20, with more still being found;
  • collected approximately 400 rock samples;
  • completed the project’s first trenching program, with 18 trenches dug, mapped, sampled and backfilled across the priority veins. Most trench assays are pending; and
  • commenced drone mag, to be followed by 3D inversion process for further precision of drill targets.

Sampling highlights. Sampling to date has returned high-grade silver with gold and antimony from several veins. Our first site-visit grab samples of San Miguel vein material returned up to 3,100 g/t silver and 12.8 g/t gold (February 24, 2026), and a follow-up San Miguel sample returned 651 g/t silver and 3.24 g/t gold (May 4, 2026). Of the 186 samples reported on August 25, 2026, a dump sample from the El Sabino mine area returned 1,030 g/t silver with 0.27% antimony, and channel samples returned 941 g/t silver over 0.7 metres on the El Sabino vein trend, 811 g/t silver over 1.4 metres at the El Sabino mine and 788 g/t silver with 1.05 g/t gold over 0.25 metres at the El Salto mine. Grab and dump samples are selective by nature and are not necessarily representative of the mineralization on the project; channel and chip widths are as recorded in the field and may not represent true widths.

The veins have been modelled in three dimensions in Leapfrog, using structural measurements collected on each vein, to project them to depth and plan drill sections.

Figure 1. Sierra Plata vein traces (red) and modelled vein planes in Leapfrog over the property outline (purple).

Figure 2. Sierra Plata geological model showing historic workings (black dots) and preliminary drone magnetic data. Source: J2 Metals.

Drone magnetic survey. Our review of the UAV drone magnetometer survey found that portions of the data did not meet the quality we require for detailed structural work. The contractor has agreed to re-fly those portions at no cost to J2. Once the re-flown data is accepted, Condor Consulting will complete a structural interpretation and 3D magnetic inversion. That work will be integrated with the mapping, sampling and trench results to finalize drill hole locations.

Drill permit. The drill permit application has been filed with Mexico’s environmental authority, SEMARNAT. It is supported by landowner consultations; the three landowners approached to date have agreed to drilling on their land. Drill logistics, including water sources, core storage and logging facilities, are being organized in parallel so that drilling can start promptly once the permit is granted anticipated within the next 3 months.

Miniac Project, Québec

Miniac is J2’s 100%-owned copper-gold-polymetallic project in the Abitibi greenstone belt of Québec. The IP interpretation is complete, and a 12-hole, approximately 4,865-metre drill program has been designed for winter 2027.

IP inversion and interpretation. Abitibi Geophysics delivered its final interpretation report in October 2026 for the OreVision™ resistivity/IP survey completed in April 2026. The survey covered approximately 40 line-kilometres over two grids. Three-dimensional inversions of the resistivity and chargeability data identified nine chargeable zones, seven on the main 3D grid and two on the southern 2D grid. Seven high-priority drill holes are recommended by Abitibi Geophysics.

The most important anomalies identified include:

  • IP-01, a strongly chargeable zone in the northeast of the grid, crossed by a major fault and coincident with historic VTEM conductors. Part of this response may reflect graphite, which drilling is designed to test.
  • IP-02, a chargeable trend along the main syncline that overlaps a strong magnetic high.
  • IP-08, a shallow zone on the 2D grid coincident with the Rivière Miniac-Sud gold showing.

The chargeable zones form a broadly circular pattern that follows the contacts between the dacitic/andesitic flows and the inner felsic volcanic unit. This is the stratigraphic setting that hosts the known massive sulphide horizons at Miniac. Abitibi Geophysics recommended 15 drill holes over high, medium and low targets as well as borehole electromagnetic (TDEM) surveys once drilling is complete.

Figure 3. Interpreted chargeable (IP), resistive (R) and conductive (C) zones over the Miniac geological and structural model. Source: Abitibi Geophysics, October 2026.

Winter 2027 drill program. Using the IP results and the existing geological model, our geological consultants, Groupe Axenix, have consolidated Abitibi Geophysics’ 15 recommended holes into 12 holes that test the higher priority targets, totaling approximately 4,865 metres:

Hole group Holes Approx. metres Purpose
IP anomaly targets

(High Priority)

7 3,500 Test the best chargeable, conductive and Gold Index targets, including IP-01, IP-02, IP-03, IP-04 and IP-08
Section and stratigraphic holes 4 715 Two holes on historic sections DU-80 and DU-117; two stratigraphic holes to the east
Line 20+00S vertical hole 1 650 Deep test on the southern line of the 3D grid
Total 12 4,865

Hole depths range from 125 to 800 metres. Several holes are designed to test chargeable bodies below the depth reached by historic drilling, which was mostly shallow. The program will be finalized after review and is subject to permitting.

Figure 4. Proposed winter 2027 drill holes at Miniac, with IP survey lines and IP sections for the main targets. Source: Groupe Axenix, October 2026.

Napoleon Project, Alaska

Activity at Napoleon is paused while J2 focuses its field spending on Miniac and Sierra Plata. Management is holding ongoing meetings with potential partners to find an option partner who would fund and advance exploration, allowing J2 shareholders to retain exposure to the project’s upside.

The project lies in the Fortymile district of eastern Alaska, a prolific placer gold camp, and benefits from high-resolution geophysics already in hand to guide future drilling. We will update shareholders if discussions result in an agreement.

Looking ahead to 2027

J2 expects 2027 to be a big year, with drill programs planned at both active projects:

  • Sierra Plata: complete the drone mag re-fly and Condor interpretation, receive trench assays, obtain the SEMARNAT permit and start the maiden drill program.
  • Miniac: finalize the program, complete permitting and drill in winter 2027, followed by borehole EM surveys.
  • Napoleon: continue discussions with potential option partners and consider other divestiture ideas.

We thank shareholders for their continued support and look forward to reporting progress.

On behalf of the Board,

Thomas Lamb, CEO and Director
and Graham Giles, MSc, P.Geo., Vice President Exploration, J2 Metals Inc.

For further information, please contact:

Brooklyn Reed, Executive Assistant
brooklyn@j2metals.ca · 778.918.2261 · www.j2metals.ca

Qualified Person and forward-looking statements

The technical information in this update has been reviewed and approved by Graham Giles, P.Geo., Vice President Exploration of J2, who is a Qualified Person as defined under National Instrument 43-101 Standards of Disclosure for Mineral Projects.

This update contains forward-looking statements, including statements about planned exploration and drilling, the timing and receipt of permits, the results of geophysical surveys and interpretations, and potential option arrangements for the Napoleon Project. These statements are based on management’s current expectations and assumptions, including that permits will be granted on anticipated timelines and that financing will be available. Actual results may differ materially due to exploration, regulatory, financing and market risks. Readers should not place undue reliance on forward-looking statements, and the Company undertakes no obligation to update them except as required by law.

Sources: J2 news release, August 25, 2026 · J2 news release, July 29, 2026 · Abitibi Geophysics report 26QC040-P2 (Oct 2026) · Groupe Axenix proposed drilling campaign (Oct 25, 2026) · Sierra Plata monthly reports (Aug and Sep 2026)